The <b>MegaView 90</b>enables you to easily connect TVs at multiple locations in the home to one decoder in one central area.<br><br>The <b>MegaView 90</b>consists of one HDMI transmitter and one HDMI receiver. Unique to the <b>MegaView 90</b>is that you can connect additional receivers (available separately) to a single HDMI transmitter. This enables you to extend the signal of, for example, a decoder for up to 120 metres over 1 CAT 5e/6 cable, to one or more TVs (>10).
You use an HDMI cable to connect the decoder to the MegaView transmitter, and another HDMI cable to connect the MegaView receiver to your (2nd) TV. The MegaView transmitter and receiver are connected through a UTP cable.<br><br>Additionally, you can use the <b>MegaView 90</b>in combination with your existing home network (LAN), including routers and switches.<br><br>If you also want to operate the source device remotely, you should select the MegaView 90, with built-in infrared return function. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-054-4580, indicating validated use in U.S.
government and defense logistics supply chains.
| width | 80.0 MILLIMETERS NOMINAL MM |
| height | 80.0 MILLIMETERS NOMINAL MM |
| length | 32.0 MILLIMETERS NOMINAL MM |
| material | PLASTIC OVERALL |
| body_style | TUBE TYPE |
| drive_type | DIRECT |
| air_flow_rate | 32.0 CUBIC FEET PER MINUTE NOMINAL |
| overall_length | 1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM IN |
| surface_finish | 125.0 MICROINCHES LARGEST OUTSIDE DIAMETER |
| inside_diameter | 0.312 INCHES NOMINAL IN |
| outside_diameter | 0.372 INCHES NOMINAL IN |
| overall_diameter | 0.246 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN |
| NSN | 5998-00-054-4580 |