PartsTable / COMPONENT / 83028
83028
✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
- For good and interference-free signal transmission.<br>- Fully shielded metal plugs for best shielding.<br>- Wires with high-density shielding for audio.<br>- Gold-plated contact surfaces.<br>- Outside diameter: 4.5 mm.<br>- Mechanical resistance.<br>- Very small design plugs.<br>- Easy to grasp due to additional silicone ring.<br>- Colour: black.<br>- Length: 3.0 m. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2330, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
83028
NSN: 5330-00-641-2330 FSC: 5330 CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
material LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN housing_bore_diameter 3.623 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 2.500 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-641-2330
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 83028
MFR: Hama
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: ANGULAR
• SEAL WIDTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• HOUSING BORE DIAMETER: 3.623 INCHES NOMINAL IN
• MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
• ACCOMMODATED SHAFT DIAMETER: 2.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLE SQUARE SEALING ELEMENT STYLE ANGULAR SEAL WIDTH 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT HOUSING BORE DIAMETER 3.623 INCHES NOMINAL IN MATERIAL LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT ACCOMMODATED SHAFT DIAMETER 2.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
11611 Interchangeable interchangeable cross-reference
interchangeable
00911611 Interchangeable interchangeable cross-reference
interchangeable
9-11611 Interchangeable interchangeable cross-reference
interchangeable
SM-B-148637 Interchangeable interchangeable cross-reference
interchangeable
07-241 Interchangeable interchangeable cross-reference
interchangeable
201-77193 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 83028?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 83028?
83028 is a SWITCH,TOGGLE manufactured by Hama.
What parts can replace 83028?
There are 25 known substitutes for 83028: 11611, 00911611, 9-11611 and 22 more. Substitute compatibility should be verified for your specific system.
Is 83028 still available?
83028 is currently cancelled.