PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00911611
00911611 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, housing_bore_diameter: 0.875 INCHES NOMINAL IN, sealing_element_style: VERTICAL, accommodated_shaft_diameter: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-215-5570, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00911611
NSN: 5330-00-215-5570
FSC: 5330
CAGE: 16662 — LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
housing_bore_diameter0.875 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter0.500 INCHES NOMINAL IN
NSN5330-00-215-5570
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00911611 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
HOUSING BORE DIAMETER: 0.875 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER0.500 INCHES NOMINAL IN
MATERIALSTEEL CASE
HOUSING BORE DIAMETER0.875 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEVERTICAL
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
11611Interchangeable
interchangeable cross-reference
interchangeable
SM-B-148637Interchangeable
interchangeable cross-reference
interchangeable
07-241Interchangeable
interchangeable cross-reference
interchangeable
201-77193Interchangeable
interchangeable cross-reference
interchangeable
1493Interchangeable
interchangeable cross-reference
interchangeable
C54339Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00911611?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00911611?
00911611 is a SEAL,PLAIN ENCASED.
What parts can replace 00911611?
There are 19 known substitutes for 00911611: 11611, SM-B-148637, 07-241 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00911611?
00911611 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-215-5570. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00911611

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026