PartsTable
Technical Data Sheet
PartsTable / O-RING / 8282-73114
8282-73114 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, outside_diameter: 16.233 INCHES NOMINAL IN, center_hole_diameter: 15.910 INCHES MINIMUM AND 16.000 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-005-0603, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8282-73114
NSN: 5331-00-005-0603
FSC: 5331 — O-RING
CAGE: 07322 — MINNESOTA RUBBER CO (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
outside_diameter16.233 INCHES NOMINAL IN
center_hole_diameter15.910 INCHES MINIMUM AND 16.000 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-005-0603
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8282-73114 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 16.233 INCHES NOMINAL IN
•
MATERIAL: RUBBER SILICONE CLASS Q
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 15.910 INCHES MINIMUM AND 16.000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER16.233 INCHES NOMINAL IN
MATERIALRUBBER SILICONE CLASS Q
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER15.910 INCHES MINIMUM AND 16.000 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
AS568-282Interchangeable
interchangeable cross-reference
interchangeable
AMS7267Interchangeable
interchangeable cross-reference
interchangeable
028-13525-000Interchangeable
interchangeable cross-reference
interchangeable
AMS3209IInterchangeable
interchangeable cross-reference
interchangeable
2-282-N674-70Interchangeable
interchangeable cross-reference
interchangeable
2-282Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8282-73114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8282-73114?
8282-73114 is a O-RING.
What parts can replace 8282-73114?
There are 11 known substitutes for 8282-73114: AS568-282, AMS7267, 028-13525-000 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8282-73114?
8282-73114 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-005-0603. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8282-73114

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026