PartsTable
Technical Data Sheet
PartsTable / O-RING / 028-13525-000
028-13525-000 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, temp_rating: -35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 16.150 INCHES MINIMUM AND 16.316 INCHES MAXIMUM IN, center_hole_diameter: 15.910 INCHES MINIMUM AND 16.000 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-851-1536, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
028-13525-000
NSN: 5331-00-851-1536
FSC: 5331 — O-RING
CAGE: 66935 — JOHNSON CONTROLS NAVY SYSTEMS, LLC (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
temp_rating-35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter16.150 INCHES MINIMUM AND 16.316 INCHES MAXIMUM IN
center_hole_diameter15.910 INCHES MINIMUM AND 16.000 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-851-1536
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 028-13525-000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
•
OUTSIDE DIAMETER: 16.150 INCHES MINIMUM AND 16.316 INCHES MAXIMUM IN
•
TEMP RATING: -35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 15.910 INCHES MINIMUM AND 16.000 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER CHLOROPRENE CLASS CR
OUTSIDE DIAMETER16.150 INCHES MINIMUM AND 16.316 INCHES MAXIMUM IN
TEMP RATING-35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER15.910 INCHES MINIMUM AND 16.000 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
AS568B-282Interchangeable
interchangeable cross-reference
interchangeable
AS568-282Interchangeable
interchangeable cross-reference
interchangeable
A-A-59588 CL 1B GR40Interchangeable
interchangeable cross-reference
interchangeable
AMS7267Interchangeable
interchangeable cross-reference
interchangeable
2-282-N674-70Interchangeable
interchangeable cross-reference
interchangeable
2-282Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 028-13525-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 028-13525-000?
028-13525-000 is a O-RING.
What parts can replace 028-13525-000?
There are 14 known substitutes for 028-13525-000: AS568B-282, AS568-282, A-A-59588 CL 1B GR40 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 028-13525-000?
028-13525-000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-851-1536. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 028-13525-000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026