PartsTable / COMPONENT / 82283
82283
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include phase: SINGLE INPUT, diameter: 0.281 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN, material: STEEL, duty_cycle: CONTINUOUS, point_size: 0.188 INCHES IN, body_height: 4.500 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-239-1361, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
82283
NSN: 5340-00-239-1361 FSC: 5340 CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
phase SINGLE INPUT diameter 0.281 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN material STEEL duty_cycle CONTINUOUS point_size 0.188 INCHES IN body_height 4.500 INCHES MAXIMUM IN shank_shape HEXAGON power_rating 0.0250 HORSEPOWER OUTPUT winding_type SYNCHRONOUS overall_width 3.250 INCHES MAXIMUM IN cooling_method NATURAL CONVECTION VENTILATED inclosure_type FULLY INCLOSED NSN 5340-00-239-1361
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 82283
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• DIAMETER: 0.281 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN
• MATERIAL THICKNESS: 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
• SURFACE TREATMENT: CADMIUM BAND
• TONGUE HOLE TYPE: ROUND, UNTHREADED
• LOOP INSIDE DIAMETER: 0.516 INCHES NOMINAL IN
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER 0.281 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN MATERIAL THICKNESS 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN MATERIAL STEEL BAND SURFACE TREATMENT CADMIUM BAND OVERALL WIDTH 0.625 INCHES NOMINAL IN TONGUE HOLE TYPE ROUND, UNTHREADED LOOP INSIDE DIAMETER 0.516 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.688 INCHES NOMINAL IN STYLE DESIGNATOR SINGLE LOOP DISTANCE FROM LOOP CENTER TO TONGUE END 1.001 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
86707 Upgraded Successor successor cross-reference
successor
20298 Interchangeable interchangeable cross-reference
interchangeable
3990332 Interchangeable interchangeable cross-reference
interchangeable
5647 Interchangeable interchangeable cross-reference
interchangeable
82282 Interchangeable interchangeable cross-reference
interchangeable
D168403 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 82283?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 82283?
82283 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 82283?
There are 17 known substitutes for 82283: 86707, 20298, 3990332 and 14 more. Substitute compatibility should be verified for your specific system.
Is 82283 still available?
82283 is currently cancelled.