PartsTable
Technical Data Sheet
Download PDF

81828-2 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

81828-2: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_width: 0.532 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, body_height: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, body_length: 1.876 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN, cubic_measure: 0.719 CUBIC INCHES, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCASED. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-138-7390, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 81828-2
NSN: 5905-00-138-7390
NIINs: 001387390, 013425217
FSC: 5905 — Resistor
CAGE: 19203 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV US ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND ARMAMENT (USA)
SPECIFICATIONS
body_width0.532 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
body_height0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
body_length1.876 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
cubic_measure0.719 CUBIC INCHES
terminal_typeTAB, SOLDER LUG
inclosure_typeENCASED
terminal_length0.438 INCHES NOMINAL IN
major_componentsBUS BARS
style_designatorAXIAL TERMINAL (S)
mounting_hole_size0.125 INCHES NOMINAL IN
electrical_resistance100.000 OHMS
reliability_indicatorESTABLISHED
NSN5905-00-138-7390
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,FIXED,WIRE WOUND,INDUCT TITLE COMPONENT PN 81828-2 MFR RESISTOR,FIXED,WIRE WO
KEY FEATURES
•
RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000
•
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -30.0 TO 30.0
•
ELECTRICAL RESISTANCE: 100.000 OHMS
•
INCLOSURE TYPE: ENCASED
•
MOUNTING HOLE SIZE: 0.125 INCHES NOMINAL IN
•
TERMINAL TYPE: TAB, SOLDER LUG
•
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH: 1.562 INCHES NOMINAL IN
•
TERMINAL LENGTH: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
RESISTANCE TOLERANCE IN PERCENT-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-30.0 TO 30.0
ELECTRICAL RESISTANCE100.000 OHMS
INCLOSURE TYPEENCASED
MOUNTING HOLE SIZE0.125 INCHES NOMINAL IN
TERMINAL TYPETAB, SOLDER LUG
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH1.562 INCHES NOMINAL IN
TERMINAL LENGTH0.438 INCHES NOMINAL IN
BODY WIDTH0.532 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
BODY HEIGHT0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 10
RH-50 100 OHM 1PCTReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
RH50-61-1000JReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
RH50-100R0FReference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
RH50-100-1PCTReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
620-100OHM-3PCTReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
RH50-100OHMPORM3PCTReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 81828-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 81828-2?
81828-2 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 81828-2?
There are 10 known substitutes for 81828-2: RH-50 100 OHM 1PCT, RH50-61-1000J, RH50-100R0F and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 81828-2?
81828-2 is cataloged in the U.S. Government catalog under NSN 5905-00-138-7390. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 81828-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.