RH50-100OHMPORM3PCT — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

RH50-100OHMPORM3PCT: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_width: 0.532 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, body_height: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, body_length: 1.876 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN, cubic_measure: 0.719 CUBIC INCHES, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCASED. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-138-7390, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ RH50-100OHMPORM3PCT

NSN: 5905-00-138-7390
FSC: 5905 — Resistor
CAGE: 91637 — VISHAY DALE ELECTRONICS, LLC DIV VISHAY AMERICAS (USA)

SPECIFICATIONS

body_width	0.532 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
body_height	0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
body_length	1.876 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
cubic_measure	0.719 CUBIC INCHES
terminal_type	TAB, SOLDER LUG
inclosure_type	ENCASED
terminal_length	0.438 INCHES NOMINAL IN
style_designator	AXIAL TERMINAL (S)
mounting_hole_size	0.125 INCHES NOMINAL IN
electrical_resistance	100.000 OHMS
reliability_indicator	ESTABLISHED
unpackaged_unit_weight	32.0 GRAMS G
NSN	5905-00-138-7390

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -30.0 TO 30.0

•

ELECTRICAL RESISTANCE: 100.000 OHMS

•

INCLOSURE TYPE: ENCASED

•

MOUNTING HOLE SIZE: 0.125 INCHES NOMINAL IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH: 1.562 INCHES NOMINAL IN

•

TERMINAL LENGTH: 0.438 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-30.0 TO 30.0
ELECTRICAL RESISTANCE	100.000 OHMS
INCLOSURE TYPE	ENCASED
MOUNTING HOLE SIZE	0.125 INCHES NOMINAL IN
TERMINAL TYPE	TAB, SOLDER LUG
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	1.562 INCHES NOMINAL IN
TERMINAL LENGTH	0.438 INCHES NOMINAL IN
BODY WIDTH	0.532 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
BODY HEIGHT	0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 9

RH-50 100 OHM 1PCTReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

RH50-61-1000JReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

RH50-100R0FReference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

RH50-100-1PCTReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

620-100OHM-3PCTReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MIL-PRF-39009/1Reference document

Same NSN cross-reference

Reference document — Identification reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy RH50-100OHMPORM3PCT?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RH50-100OHMPORM3PCT?

RH50-100OHMPORM3PCT is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace RH50-100OHMPORM3PCT?

There are 9 known substitutes for RH50-100OHMPORM3PCT: RH-50 100 OHM 1PCT, RH50-61-1000J, RH50-100R0F and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for RH50-100OHMPORM3PCT?

RH50-100OHMPORM3PCT is cataloged in the U.S. Government catalog under NSN 5905-00-138-7390. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RH50-100OHMPORM3PCT — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — RH50-100OHMPORM3PCT