PartsTable
Technical Data Sheet
Download PDF

810-2177518-10PIECE150VSZ2 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

810-2177518-10PIECE150VSZ2: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include angle: 47.0 DEGREES NOMINAL, material: STEEL OVERALL, special_features: TWO GROOVES ID, precious_material: SILVER, peripheral_diameter: 10.768 INCHES MINIMUM AND 10.773 INCHES MAXIMUM IN, center_hole_diameter: 9.760 INCHES MINIMUM AND 9.772 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-097-8050, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
810-2177518-10PIECE150VSZ2
NSN: 5330-01-097-8050
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
angle47.0 DEGREES NOMINAL
materialSTEEL OVERALL
special_featuresTWO GROOVES ID
precious_materialSILVER
peripheral_diameter10.768 INCHES MINIMUM AND 10.773 INCHES MAXIMUM IN
center_hole_diameter9.760 INCHES MINIMUM AND 9.772 INCHES MAXIMUM IN
cross-sectional_height0.813 INCHES NOMINAL IN
cross-sectional_shape_styleCUP
precious_material_and_locationOVERALL SILVER
material_document_and_classificationAISI 1008 TO 1015 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-097-8050
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 810-2177518-10PIECE150VSZ2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.813 INCHES NOMINAL IN
•
PRECIOUS MATERIAL: SILVER
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 1008 TO 1015 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
ANGLE: 47.0 DEGREES NOMINAL
•
PERIPHERAL DIAMETER: 10.768 INCHES MINIMUM AND 10.773 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 9.760 INCHES MINIMUM AND 9.772 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.813 INCHES NOMINAL IN
PRECIOUS MATERIALSILVER
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 1008 TO 1015 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLECUP
ANGLE47.0 DEGREES NOMINAL
PERIPHERAL DIAMETER10.768 INCHES MINIMUM AND 10.773 INCHES MAXIMUM IN
SPECIAL FEATURESTWO GROOVES ID
CENTER HOLE DIAMETER9.760 INCHES MINIMUM AND 9.772 INCHES MAXIMUM IN
PRECIOUS MATERIAL AND LOCATIONOVERALL SILVER
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
803-2177518-10X X-47Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
810-2177518-10XX47Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
810-2177518-10PReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2177518-10XX PIECE 47Reference document
Same NSN cross-reference
Reference document — Secondary reference
0816-047-357-VSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 810-2177518-10PIECE150VSZ2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 810-2177518-10PIECE150VSZ2?
810-2177518-10PIECE150VSZ2 is a PACKING,PREFORMED.
What parts can replace 810-2177518-10PIECE150VSZ2?
There are 5 known substitutes for 810-2177518-10PIECE150VSZ2: 803-2177518-10X X-47, 810-2177518-10XX47, 810-2177518-10P and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 810-2177518-10PIECE150VSZ2?
810-2177518-10PIECE150VSZ2 is cataloged in the U.S. Government catalog under NSN 5330-01-097-8050. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 810-2177518-10PIECE150VSZ2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.