810-2177518-10P — PACKING,PREFORMED

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

810-2177518-10P: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include angle: 47.0 DEGREES NOMINAL, material: STEEL OVERALL, special_features: TWO GROOVES ID, precious_material: SILVER, peripheral_diameter: 10.768 INCHES MINIMUM AND 10.773 INCHES MAXIMUM IN, center_hole_diameter: 9.760 INCHES MINIMUM AND 9.772 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-097-8050, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

810-2177518-10P

NSN: 5330-01-097-8050
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)

SPECIFICATIONS

angle	47.0 DEGREES NOMINAL
material	STEEL OVERALL
special_features	TWO GROOVES ID
precious_material	SILVER
peripheral_diameter	10.768 INCHES MINIMUM AND 10.773 INCHES MAXIMUM IN
center_hole_diameter	9.760 INCHES MINIMUM AND 9.772 INCHES MAXIMUM IN
cross-sectional_height	0.813 INCHES NOMINAL IN
cross-sectional_shape_style	CUP
precious_material_and_location	OVERALL SILVER
material_document_and_classification	AISI 1008 TO 1015 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN	5330-01-097-8050

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.813 INCHES NOMINAL IN

•

PRECIOUS MATERIAL: SILVER

•

MATERIAL DOCUMENT AND CLASSIFICATION: AISI 1008 TO 1015 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

CROSS-SECTIONAL SHAPE STYLE: CUP

•

ANGLE: 47.0 DEGREES NOMINAL

•

PERIPHERAL DIAMETER: 10.768 INCHES MINIMUM AND 10.773 INCHES MAXIMUM IN

•

CENTER HOLE DIAMETER: 9.760 INCHES MINIMUM AND 9.772 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.813 INCHES NOMINAL IN
PRECIOUS MATERIAL	SILVER
MATERIAL DOCUMENT AND CLASSIFICATION	AISI 1008 TO 1015 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLE	CUP
ANGLE	47.0 DEGREES NOMINAL
PERIPHERAL DIAMETER	10.768 INCHES MINIMUM AND 10.773 INCHES MAXIMUM IN
SPECIAL FEATURES	TWO GROOVES ID
CENTER HOLE DIAMETER	9.760 INCHES MINIMUM AND 9.772 INCHES MAXIMUM IN
PRECIOUS MATERIAL AND LOCATION	OVERALL SILVER
MATERIAL	STEEL OVERALL

SUBSTITUTES & CROSS-REFERENCES 5

803-2177518-10X X-47Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

810-2177518-10XX47Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2177518-10XX PIECE 47Reference document

Same NSN cross-reference

Reference document — Secondary reference

810-2177518-10PIECE150VSZ2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

0816-047-357-VSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 810-2177518-10P?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 810-2177518-10P?

810-2177518-10P is a PACKING,PREFORMED.

What parts can replace 810-2177518-10P?

There are 5 known substitutes for 810-2177518-10P: 803-2177518-10X X-47, 810-2177518-10XX47, 2177518-10XX PIECE 47 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 810-2177518-10P?

810-2177518-10P is cataloged in the U.S. Government catalog under NSN 5330-01-097-8050. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

810-2177518-10P — PACKING,PREFORMED

Request a Quote — 810-2177518-10P