PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 803-6397359 REV A PC. NO. 6
803-6397359 REV A PC. NO. 6 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The 803-6397359 REV A PC. NO. 6 is a the manufacturer industrial component.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-446-6655, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
803-6397359 REV A PC. NO. 6
NSN: 3110-01-446-6655
FSC: 3110
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
Part Number803-6397359 REV A PC. NO. 6
NSN3110-01-446-6655
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 803-6397359 REV A PC. NO. 6 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 3.0000 INCHES NOMINAL IN
•
MATERIAL: STEEL ROLLER
•
LUBRICATION MATERIAL: GREASE
•
SEAL QUANTITY: 2
•
ALIGNMENT TYPE: RIGID
•
BEARING SEAL TYPE: CONTACT
•
INNER RING WIDTH: 1.8125 INCHES NOMINAL IN
•
CROWN RADIUS: 30.0000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER3.0000 INCHES NOMINAL IN
MATERIALSTEEL ROLLER
LUBRICATION MATERIALGREASE
SEAL QUANTITY2
ALIGNMENT TYPERIGID
BEARING SEAL TYPECONTACT
INNER RING WIDTH1.8125 INCHES NOMINAL IN
CROWN RADIUS30.0000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OUTER RING WIDTH1.7500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
AS21442Interchangeable
interchangeable cross-reference
interchangeable
MS21442-221Interchangeable
interchangeable cross-reference
interchangeable
AS39901Interchangeable
interchangeable cross-reference
interchangeable
MS21442-161Interchangeable
interchangeable cross-reference
interchangeable
MS21442-321Interchangeable
interchangeable cross-reference
interchangeable
MS21442-481Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 803-6397359 REV A PC. NO. 6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 803-6397359 REV A PC. NO. 6?
803-6397359 REV A PC. NO. 6 is a 803-6397359 REV A PC. NO. 6.
What parts can replace 803-6397359 REV A PC. NO. 6?
There are 6 known substitutes for 803-6397359 REV A PC. NO. 6: AS21442, MS21442-221, AS39901 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 803-6397359 REV A PC. NO. 6?
803-6397359 REV A PC. NO. 6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-446-6655. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 803-6397359 REV A PC. NO. 6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026