PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS21442-161
MS21442-161 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: PLASTIC ACETAL OR PLASTIC POLYHEXAMETHYLENE ADIPAMIDE SEAL, crown_radius: 12.0000 INCHES NOMINAL IN, bore_diameter: 0.3125 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 0.6875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-255-5040, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21442-161
NSN: 3110-01-255-5040
FSC: 3110
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialPLASTIC ACETAL OR PLASTIC POLYHEXAMETHYLENE ADIPAMIDE SEAL
crown_radius12.0000 INCHES NOMINAL IN
bore_diameter0.3125 INCHES NOMINAL IN
seal_quantity2
alignment_typeRIGID
surface_finishGROUND
inner_ring_width0.6875 INCHES NOMINAL IN
outer_ring_width0.6250 INCHES NOMINAL IN
special_featuresOIL GROOVE IN OUTER RING OPTIONAL
style_designatorTRACK ROLLER, NON-SEPARABLE
bearing_seal_typeCONTACT
features_providedLUBRICATION GROOVE AND LUBRICATION HOLE
NSN3110-01-255-5040
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS21442-161 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
CROWN RADIUS: 12.0000 INCHES NOMINAL IN
•
FEATURES PROVIDED: LUBRICATION GROOVE AND LUBRICATION HOLE
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OUTER RING WIDTH: 0.6250 INCHES NOMINAL IN
•
INNER RING WIDTH: 0.6875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESOIL GROOVE IN OUTER RING OPTIONAL
ALIGNMENT TYPERIGID
CROWN RADIUS12.0000 INCHES NOMINAL IN
FEATURES PROVIDEDLUBRICATION GROOVE AND LUBRICATION HOLE
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OUTER RING WIDTH0.6250 INCHES NOMINAL IN
INNER RING WIDTH0.6875 INCHES NOMINAL IN
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
4NBC612ZPANG25Interchangeable
interchangeable cross-reference
interchangeable
505-4Interchangeable
IBM Flex System FC5054 4-Port FC-16GB Adapter
interchangeable
24NBC2036YZP2CInterchangeable
interchangeable cross-reference
interchangeable
24NBC2036YZPANG25Interchangeable
interchangeable cross-reference
interchangeable
64A98B76-1Interchangeable
interchangeable cross-reference
interchangeable
AS39901Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS21442-161?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21442-161?
MS21442-161 is a BEARING,ROLLER,NEEDLE.
What parts can replace MS21442-161?
There are 21 known substitutes for MS21442-161: 4NBC612ZPANG25, 505-4, 24NBC2036YZP2C and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21442-161?
MS21442-161 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-255-5040. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21442-161

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026