PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8029165
8029165 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CORK AND RESIN NATURAL OR RESIN SYNTHETIC OVERALL, hole_diameter: 0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.000 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 2.875 INCHES NOMINAL IN, bolt_circle_diameter: 4.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-9794, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8029165
NSN: 5330-00-178-9794
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialCORK AND RESIN NATURAL OR RESIN SYNTHETIC OVERALL
hole_diameter0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.000 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter2.875 INCHES NOMINAL IN
bolt_hole_quantity2
bolt_circle_diameter4.000 INCHES NOMINAL IN
outside_corner_radius0.500 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center1.500 INCHES NOMINAL IN
material_document_and_classificationHH-C-576,TY 1A,CL 2 FED SPEC ALL MATERIAL RESPONSES OVERALL A
NSN5330-00-178-9794
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8029165 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 12.000 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1B TYPE AND 2 CLASS
•
THICKNESS: 0.125 INCHES NOMINAL IN
•
MATERIAL: CORK AND RESIN NATURAL AND RESIN SYNTHETIC
•
MINIMUM TENSILE STRENGTH: ERR-060
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH12.000 INCHES NOMINAL IN
WIDTH12.000 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1B TYPE AND 2 CLASS
THICKNESS0.125 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1B TYPE AND 2 CLASS
MATERIALCORK AND RESIN NATURAL AND RESIN SYNTHETIC
MATERIALCORK AND RESIN NATURAL AND RESIN SYNTHETIC
MINIMUM TENSILE STRENGTHERR-060
THICKNESS0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
HHC576TYPE1BCLASS2Interchangeable
interchangeable cross-reference
interchangeable
N4FB3557GInterchangeable
interchangeable cross-reference
interchangeable
ASTM F104Interchangeable
interchangeable cross-reference
interchangeable
F215000M1RWInterchangeable
interchangeable cross-reference
interchangeable
E-4515 ITEM 10Interchangeable
interchangeable cross-reference
interchangeable
EL904-826Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8029165?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8029165?
8029165 is a GASKET.
What parts can replace 8029165?
There are 13 known substitutes for 8029165: HHC576TYPE1BCLASS2, N4FB3557G, ASTM F104 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8029165?
8029165 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-9794. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8029165

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026