PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ASTM F104
ASTM F104 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CORK SHEET is a the manufacturer industrial component. Key specifications include overall_length: 150.000 INCHES NOMINAL IN, special_features: CONTAINS NON-ASBESTOS MATERIALS, supplementary_features: OVERALL WIDTH 36.0 INCHES; OVERALL THICKNESS 0.125 INCHES IN, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-9791, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ASTM F104
NSN: 5330-00-178-9791
FSC: 5330
CAGE: 81346 — AMERICAN SOCIETY FOR TESTING AND MATERIALS DBA ASTM INTERNATIONAL (USA)
SPECIFICATIONS
overall_length150.000 INCHES NOMINAL IN
special_featuresCONTAINS NON-ASBESTOS MATERIALS
supplementary_featuresOVERALL WIDTH 36.0 INCHES; OVERALL THICKNESS 0.125 INCHES IN
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-00-178-9791
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ASTM F104 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 12.000 INCHES NOMINAL IN
•
THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL: CORK AND RESIN NATURAL AND RESIN SYNTHETIC
•
NONDEFINITIVE SPEC/STD DATA: 1B TYPE AND 3 CLASS
•
MINIMUM TENSILE STRENGTH: ERR-060
•
LENGTH: 36.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH12.000 INCHES NOMINAL IN
THICKNESS0.031 INCHES NOMINAL IN
MATERIALCORK AND RESIN NATURAL AND RESIN SYNTHETIC
NONDEFINITIVE SPEC/STD DATA1B TYPE AND 3 CLASS
THICKNESS0.031 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTHERR-060
MATERIALCORK AND RESIN NATURAL AND RESIN SYNTHETIC
LENGTH36.000 INCHES NOMINAL IN
WIDTH12.000 INCHES NOMINAL IN
LENGTH36.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
F215000M1RWInterchangeable
interchangeable cross-reference
interchangeable
E-4515 ITEM 10Interchangeable
interchangeable cross-reference
interchangeable
EL904-826Interchangeable
interchangeable cross-reference
interchangeable
ASTMF104-03Interchangeable
interchangeable cross-reference
interchangeable
1713094Interchangeable
interchangeable cross-reference
interchangeable
HHC576TYPE1BCLASS2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ASTM F104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ASTM F104?
ASTM F104 is a CORK SHEET.
What parts can replace ASTM F104?
There are 20 known substitutes for ASTM F104: F215000M1RW, E-4515 ITEM 10, EL904-826 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ASTM F104?
ASTM F104 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-9791. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ASTM F104

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026