PartsTable
Technical Data Sheet
PartsTable / STORAGE_HDD / 800034-00
800034-00 ✓ Verified by PartsTable
— · STORAGE_HDD · 3.5_SATA_HDD
WHAT YOU NEED TO KNOW
SAS backplane supports SATA, not vice versa NL-SAS = SAS protocol at nearline (7.2K) speed — NOT SATA
Gen8 LFF tray ≠ Gen10 tray — different screw holes
PRODUCT OVERVIEW

The CANNISTER DISK DRIVE is a the manufacturer hard disk drive designed for enterprise environments demanding consistent performance and data integrity. Key specifications include material: STEEL OVERALL, thickness: 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, hole_diameter: 0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, overall_diameter: 0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0837, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 800034-00
NSN: 5310-00-167-0837
FSC: 5310
CAGE: 32345 — DEFENSE REDUCTION AGENCY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
hole_diameter0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
overall_diameter0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identification5895-01-220-0321
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationMIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
general_characteristics_item_descriptionC/O DRIVE AY,RMVBL,DS3000,P/N 150-000-00 1; LABEL,ZETACO S/N,PCB AY,P/N 099-009-00 1
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-167-0837
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 800034-00 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 800034-00 MFR OEM
KEY FEATURES
•
PERIPHERAL SHAPE STYLE: ROUND
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HOLE DIAMETER: 0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TYPICAL APPLICATIONS
  • Enterprise storage arrays and SANs
  • Direct-attached storage (DAS) expansion
  • Database tier storage (OLTP, OLAP)
  • Virtual machine datastore expansion
  • Backup-to-disk and disaster recovery targets
  • Content delivery and media streaming storage
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE DIAMETER0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
OVERALL DIAMETER0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CENTER HOLE SHAPE STYLEROUND
THICKNESS0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
0160-0024Interchangeable
interchangeable cross-reference
interchangeable
PKM4P5Interchangeable
interchangeable cross-reference
interchangeable
100019Interchangeable
interchangeable cross-reference
interchangeable
8403.00Interchangeable
interchangeable cross-reference
interchangeable
0-8403-00Interchangeable
interchangeable cross-reference
interchangeable
800034Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 800034-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800034-00?
800034-00 is a CANNISTER DISK DRIVE. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 800034-00?
There are 24 known substitutes for 800034-00: 0160-0024, PKM4P5, 100019 and 21 more. Substitute compatibility should be verified for your specific system.
Is 800034-00 still available?
800034-00 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800034-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026