PartsTable
Technical Data Sheet
PartsTable / MRO / 800034
800034 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include material: PLASTIC CASE, thickness: 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 1.938 INCHES NOMINAL IN, body_diameter: 0.687 INCHES NOMINAL IN, hole_diameter: 0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0837, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 800034
NSN: 5310-00-167-0837
FSC: 5310
CAGE: 19203 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV US ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND ARMAMENT (USA)
SPECIFICATIONS
materialPLASTIC CASE
thickness0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_length1.938 INCHES NOMINAL IN
body_diameter0.687 INCHES NOMINAL IN
hole_diameter0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
terminal_length1.750 INCHES NOMINAL IN
overall_diameter0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
dielectric_materialPLASTIC
reliability_indicatorNOT ESTABLISHED
peripheral_shape_styleROUND
NSN5310-00-167-0837
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 800034 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL SHAPE STYLE: ROUND
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HOLE DIAMETER: 0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE DIAMETER0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
OVERALL DIAMETER0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CENTER HOLE SHAPE STYLEROUND
THICKNESS0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
0160-0024Interchangeable
interchangeable cross-reference
interchangeable
PKM4P5Interchangeable
interchangeable cross-reference
interchangeable
100019Interchangeable
interchangeable cross-reference
interchangeable
8403.00Interchangeable
interchangeable cross-reference
interchangeable
0-8403-00Interchangeable
interchangeable cross-reference
interchangeable
800034Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 800034?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800034?
800034 is a CAPACITOR,FIXED,PLASTIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 800034?
There are 24 known substitutes for 800034: 0160-0024, PKM4P5, 100019 and 21 more. Substitute compatibility should be verified for your specific system.
Is 800034 still available?
800034 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800034

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026