PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 80-7835-01
80-7835-01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING, construction: TWO-PIECE, outside_diameter: 1.170 INCHES NOMINAL IN, special_features: O/A THK 0.130 IN. IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-203-0277, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
80-7835-01
NSN: 5330-01-203-0277
FSC: 5330
CAGE: 30554 — DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING
constructionTWO-PIECE
outside_diameter1.170 INCHES NOMINAL IN
special_featuresO/A THK 0.130 IN. IN
NSN5330-01-203-0277
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 80-7835-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CORROSION RESISTING RETAINER
•
CONSTRUCTION: TWO-PIECE
•
OUTSIDE DIAMETER: 1.170 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CORROSION RESISTING RETAINER
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING
CONSTRUCTIONTWO-PIECE
SPECIAL FEATURESO/A THK 0.130 IN. IN
OUTSIDE DIAMETER1.170 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
5302Interchangeable
interchangeable cross-reference
interchangeable
LW02Interchangeable
interchangeable cross-reference
interchangeable
7735998Interchangeable
interchangeable cross-reference
interchangeable
J385Interchangeable
interchangeable cross-reference
interchangeable
5302K FS940Interchangeable
interchangeable cross-reference
interchangeable
5302SBQ5A7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 80-7835-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80-7835-01?
80-7835-01 is a PACKING WITH RETAINER.
What parts can replace 80-7835-01?
There are 14 known substitutes for 80-7835-01: 5302, LW02, 7735998 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 80-7835-01?
80-7835-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-203-0277. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80-7835-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026