PartsTable
Technical Data Sheet
PartsTable / COMPONENT / LW02
LW02 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.088 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, heat_treatment: HOT ROLLED OR HARD DRAWN, outside_diameter: 0.149 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, material_thickness: 0.022 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-095-9449, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LW02
NSN: 5310-00-095-9449
FSC: 5310
CAGE: 19315 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.088 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
heat_treatmentHOT ROLLED OR HARD DRAWN
outside_diameter0.149 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
material_thickness0.022 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
NSN5310-00-095-9449
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: LW02 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
HOLE DIAMETER: 0.088 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
•
MATERIAL THICKNESS: 0.022 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.150 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
HOLE DIAMETER0.088 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
MATERIAL THICKNESS0.022 INCHES NOMINAL IN
OUTSIDE DIAMETER0.150 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
5302Interchangeable
interchangeable cross-reference
interchangeable
7735998Interchangeable
interchangeable cross-reference
interchangeable
J385Interchangeable
interchangeable cross-reference
interchangeable
LW0-2Interchangeable
interchangeable cross-reference
interchangeable
5302K FS940Interchangeable
interchangeable cross-reference
interchangeable
5302SBQ5A7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy LW02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LW02?
LW02 is a WASHER,LOCK.
What parts can replace LW02?
There are 14 known substitutes for LW02: 5302, 7735998, J385 and 11 more. Substitute compatibility should be verified for your specific system.
Is LW02 still available?
LW02 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LW02

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026