PartsTable
Technical Data Sheet
PartsTable / O-RING / 8/1-348

8/1-348 — Technical Data Sheet

✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- For charging the Canon LP-E10 battery in combination with the "Base" charging station item no. 00081200<br>- Any battery can be charged by means of the appropriate adapter plate, only a charging station is required<br>- For Canon LP-E10<br>- Adapter plate for the base station item no. 00081200 This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-005-3205, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8/1-348
NSN: 5331-01-005-3205
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length3.000 INCHES NOMINAL IN
drive_end_shapeSQUARE FIRST END INTERNAL
special_featuresLOCKING TYPE
style_designatorRIGID
features_providedMANUAL TOOL
surface_treatmentCHROMIUM OVERALL
drive_surface_size0.500 INCHES NOMINAL BOTH ENDS IN
nondefinitive_spec/std_data2 TYPE AND 2 CLASS
specification/standard_data0U583-SAE AS4283 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN5331-01-005-3205
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8/1-348 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 4.730 INCHES MINIMUM AND 4.810 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CENTER HOLE DIAMETER: 4.320 INCHES MINIMUM AND 4.380 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER4.730 INCHES MINIMUM AND 4.810 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
CENTER HOLE DIAMETER4.320 INCHES MINIMUM AND 4.380 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
30808989 ITEM 23Interchangeable
interchangeable cross-reference
interchangeable
N-999-6082-A-007 ITEM 12Interchangeable
interchangeable cross-reference
interchangeable
M82348/1-136Interchangeable
interchangeable cross-reference
interchangeable
AMS7276Interchangeable
interchangeable cross-reference
interchangeable
M83248-1-451Interchangeable
interchangeable cross-reference
interchangeable
2-141 V747-75Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8/1-348?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8/1-348?
8/1-348 is a DIAPHRAGM,VALVE,FLAT manufactured by Hama.
What parts can replace 8/1-348?
There are 31 known substitutes for 8/1-348: 30808989 ITEM 23, N-999-6082-A-007 ITEM 12, M82348/1-136 and 28 more. Substitute compatibility should be verified for your specific system.
Is 8/1-348 still available?
8/1-348 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8/1-348

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026