PartsTable
Technical Data Sheet
PartsTable / O-RING / 8/1-119
8/1-119 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 8/1-119 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-1074, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8/1-119
NSN: 5331-00-166-1074
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part Number8/1-119
NSN5331-00-166-1074
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8/1-119 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.114 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.914 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.114 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.914 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
811-19Interchangeable
interchangeable cross-reference
interchangeable
CMP811-19Interchangeable
interchangeable cross-reference
interchangeable
6126-2Interchangeable
interchangeable cross-reference
interchangeable
11-2811Interchangeable
interchangeable cross-reference
interchangeable
MILR25897ARP568 -119Interchangeable
interchangeable cross-reference
interchangeable
SP133-107Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8/1-119?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8/1-119?
8/1-119 is a 8/1-119.
What parts can replace 8/1-119?
There are 22 known substitutes for 8/1-119: 811-19, CMP811-19, 6126-2 and 19 more. Substitute compatibility should be verified for your specific system.
Is 8/1-119 still available?
8/1-119 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8/1-119

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026