PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7S4-10-10
7S4-10-10 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, thread_length: 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, screw_material: STEEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-144-3820, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7S4-10-10
NSN: 5305-00-144-3820
FSC: 5305
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)
SPECIFICATIONS
head_stylePAN
head_height0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
thread_length0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-144-3820
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 7S4-10-10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
•
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
•
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
HEAD DIAMETER0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
THREAD CLASS2A A
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
HEAD HEIGHT0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH32
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
417 776Interchangeable
interchangeable cross-reference
interchangeable
AN520-10R10Interchangeable
interchangeable cross-reference
interchangeable
5305PL1696632Interchangeable
interchangeable cross-reference
interchangeable
113615AInterchangeable
interchangeable cross-reference
interchangeable
22660ITEM1Interchangeable
interchangeable cross-reference
interchangeable
FFS92ANDTYPE3ANDSTYLE1CInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7S4-10-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7S4-10-10?
7S4-10-10 is a SCREW,MACHINE.
What parts can replace 7S4-10-10?
There are 8 known substitutes for 7S4-10-10: 417 776, AN520-10R10, 5305PL1696632 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7S4-10-10?
7S4-10-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-144-3820. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7S4-10-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026