PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFS92ANDTYPE3ANDSTYLE1C
FFS92ANDTYPE3ANDSTYLE1C ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.137 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, thread_length: 1.042 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN, screw_material: STEEL OR STEEL COMP 1010. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-144-3732, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS92ANDTYPE3ANDSTYLE1C
NSN: 5305-00-144-3732
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleROUND
head_height0.137 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
thread_length1.042 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
screw_materialSTEEL OR STEEL COMP 1010
fastener_length1.125 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-144-3732
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS92ANDTYPE3ANDSTYLE1C · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.120 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNF
•
SCREW SURFACE TREATMENT: CADMIUM
•
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY INTERNAL DRIVE STYLE
•
THREAD DIRECTION: RIGHT-HAND
•
NONDEFINITIVE SPEC/STD DATA: III TYPE AND 1C STYLE
•
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
SCREW MATERIAL: STEEL COMP 1010
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.120 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNF
SCREW SURFACE TREATMENTCADMIUM
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY INTERNAL DRIVE STYLE
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATAIII TYPE AND 1C STYLE
FASTENER LENGTH0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIALSTEEL COMP 1010
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
HEAD DIAMETER0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
AN520-8R4Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFS92ANDTYPE3ANDSTYLE1C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS92ANDTYPE3ANDSTYLE1C?
FFS92ANDTYPE3ANDSTYLE1C is a SCREW,MACHINE.
What parts can replace FFS92ANDTYPE3ANDSTYLE1C?
There is 1 known substitute for FFS92ANDTYPE3ANDSTYLE1C: AN520-8R4. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS92ANDTYPE3ANDSTYLE1C?
FFS92ANDTYPE3ANDSTYLE1C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-144-3732. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS92ANDTYPE3ANDSTYLE1C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026