PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7696469
7696469 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.497 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, material: STEEL COMP 1020 OR STEEL COMP 1112 OVERALL, overall_length: 3.250 INCHES NOMINAL IN, undercut_width: 0.312 INCHES NOMINAL IN, first_end_style: CHAMFERED, effective_length: 2.438 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-769-6469, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7696469
NSN: 5315-00-769-6469
FSC: 5315
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.497 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
materialSTEEL COMP 1020 OR STEEL COMP 1112 OVERALL
overall_length3.250 INCHES NOMINAL IN
undercut_width0.312 INCHES NOMINAL IN
first_end_styleCHAMFERED
effective_length2.438 INCHES NOMINAL IN
second_end_styleCHAMFERED
special_featuresTHD HOLE ONE END W/ 2 RELIEF HOLES
style_designatorGROOVE
undercut_diameter0.406 INCHES NOMINAL IN
first_end_locationGROOVED END
first_end_taper_angle45.0 DEGREES NOMINAL
NSN5315-00-769-6469
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7696469 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL COMP 1020 OR STEEL COMP 1112 OVERALL
•
SECOND END STYLE: CHAMFERED
•
SECOND END TAPER LENGTH: 0.190 INCHES NOMINAL IN
•
SECOND END TAPER ANGLE: 22.0 DEGREES NOMINAL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 1020 OR STEEL COMP 1112 OVERALL
SPECIAL FEATURESTHD HOLE ONE END W/ 2 RELIEF HOLES
SECOND END STYLECHAMFERED
SECOND END TAPER LENGTH0.190 INCHES NOMINAL IN
SECOND END TAPER ANGLE22.0 DEGREES NOMINAL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
OVERALL LENGTH3.250 INCHES NOMINAL IN
UNDERCUT WIDTH0.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
DMS 85099BInterchangeable
interchangeable cross-reference
interchangeable
531773-1Interchangeable
interchangeable cross-reference
interchangeable
A972Interchangeable
interchangeable cross-reference
interchangeable
R20820Interchangeable
interchangeable cross-reference
interchangeable
GP7796Interchangeable
Same NIIN cross-reference
interchangeable
363SPInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7696469?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7696469?
7696469 is a PIN,GROOVED,HEADLESS.
What parts can replace 7696469?
There are 6 known substitutes for 7696469: DMS 85099B, 531773-1, A972 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7696469?
7696469 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-769-6469. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7696469

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026