PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7602902
7602902 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SNAP HOOK is a the manufacturer industrial component. Key specifications include material: IRON MALLEABLE HOOK, design_type: SWIVEL, inside_width: 0.250 INCHES NOMINAL IN, overall_length: 2.625 INCHES NOMINAL IN, unattached_ring: NOT INCLUDED, end_connection_style: SWIVEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-850-2391, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7602902
NSN: 5340-00-850-2391
FSC: 5340
CAGE: 96508 — APEX TOOL GROUP (USA)
SPECIFICATIONS
materialIRON MALLEABLE HOOK
design_typeSWIVEL
inside_width0.250 INCHES NOMINAL IN
overall_length2.625 INCHES NOMINAL IN
unattached_ringNOT INCLUDED
end_connection_styleSWIVEL
hook_style_designatorSPRING BLADE
rubber_covered_featureNOT INCLUDED
NSN5340-00-850-2391
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7602902 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE WIDTH: 0.250 INCHES NOMINAL IN
•
END CONNECTION STYLE: SWIVEL
•
MATERIAL: IRON MALLEABLE HOOK
•
DESIGN TYPE: SWIVEL
•
UNATTACHED RING: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE WIDTH0.250 INCHES NOMINAL IN
OVERALL LENGTH2.625 INCHES NOMINAL IN
END CONNECTION STYLESWIVEL
MATERIALIRON MALLEABLE HOOK
MATERIALIRON MALLEABLE CONNECTION END
MATERIALSTEEL BLADE
DESIGN TYPESWIVEL
UNATTACHED RINGNOT INCLUDED
HOOK STYLE DESIGNATORSPRING BLADE
RUBBER COVERED FEATURENOT INCLUDED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
437-3-8Upgraded Successor
successor cross-reference
successor
70-1465Upgraded Successor
successor cross-reference
successor
70-1464Upgraded Successor
successor cross-reference
successor
437Upgraded Successor
successor cross-reference
successor
10688Upgraded Successor
successor cross-reference
successor
842793Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7602902?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7602902?
7602902 is a SNAP HOOK.
What parts can replace 7602902?
There are 21 known substitutes for 7602902: 437-3-8, 70-1465, 70-1464 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7602902?
7602902 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-850-2391. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7602902

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026