PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70-1464
70-1464 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SNAP HOOK is a the manufacturer industrial component. Key specifications include material: IRON HOOK, design_type: SWIVEL, inside_width: 0.375 INCHES NOMINAL IN, inside_length: 0.375 INCHES NOMINAL IN, overall_length: 2.625 INCHES NOMINAL IN, unattached_ring: NOT INCLUDED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-291-3546, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70-1464
NSN: 5340-00-291-3546
FSC: 5340
CAGE: 30554 — DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER (USA)
SPECIFICATIONS
materialIRON HOOK
design_typeSWIVEL
inside_width0.375 INCHES NOMINAL IN
inside_length0.375 INCHES NOMINAL IN
overall_length2.625 INCHES NOMINAL IN
unattached_ringNOT INCLUDED
end_connection_styleEYE
hook_style_designatorSPRING BLADE
rubber_covered_featureNOT INCLUDED
NSN5340-00-291-3546
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 70-1464 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE WIDTH: 0.375 INCHES NOMINAL IN
•
END CONNECTION STYLE: EYE
•
MATERIAL: IRON CONNECTION END
•
HOOK STYLE DESIGNATOR: SPRING BLADE
•
UNATTACHED RING: NOT INCLUDED
•
RUBBER COVERED FEATURE: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE WIDTH0.375 INCHES NOMINAL IN
END CONNECTION STYLEEYE
MATERIALIRON CONNECTION END
MATERIALCOPPER ALLOY BLADE
HOOK STYLE DESIGNATORSPRING BLADE
UNATTACHED RINGNOT INCLUDED
RUBBER COVERED FEATURENOT INCLUDED
MATERIALIRON HOOK
DESIGN TYPESWIVEL
OVERALL LENGTH2.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
7602902Upgraded Successor
successor cross-reference
successor
437Upgraded Successor
successor cross-reference
successor
425066Interchangeable
interchangeable cross-reference
interchangeable
A14985Interchangeable
interchangeable cross-reference
interchangeable
107364Interchangeable
interchangeable cross-reference
interchangeable
23009Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70-1464?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70-1464?
70-1464 is a SNAP HOOK.
What parts can replace 70-1464?
There are 20 known substitutes for 70-1464: 7602902, 437, 425066 and 17 more. Substitute compatibility should be verified for your specific system.
Is 70-1464 still available?
70-1464 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70-1464

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026