PartsTable
Technical Data Sheet
Download PDF

755143-1 — CLEAT,ROPE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

755143-1: CLEAT,ROPE.

The CLEAT,ROPE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302, ring_style: SPIRAL, inside_diameter: 0.573 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN, major_thickness: 0.041 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN, outside_diameter: 0.658 INCHES MINIMUM AND 0.671 INCHES MAXIMUM IN, special_features: CRIMPED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-598-2873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
755143-1
NSN: 5340-00-598-2873
NIINs: 005982873, 010874412
FSC: 5340 — Hardware, Commercial
CAGE: 81336 — CHIEF OF ENGINEERS DEPT OF ARMY (USA)
SPECIFICATIONS
materialSTEEL COMP 302
ring_styleSPIRAL
inside_diameter0.573 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN
major_thickness0.041 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN
outside_diameter0.658 INCHES MINIMUM AND 0.671 INCHES MAXIMUM IN
special_featuresCRIMPED
cross-sectional_shape_styleDOUBLE OVAL
material_document_and_classificationAISI 302 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-598-2873
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 755143-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 20 OVERALL
•
BASE TYPE: SINGLE
•
DESIGN FORM: OPEN
•
MOUNTING HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
OVERALL LENGTH ACROSS HORNS: 8.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY20 OVERALL
OVERALL HEIGHT3.531 INCHES NOMINAL IN
BASE TYPESINGLE
DESIGN FORMOPEN
MOUNTING HOLE DIAMETER0.250 INCHES NOMINAL IN
OVERALL LENGTH10.000 INCHES NOMINAL BOTH ENDS IN
OVERALL WIDTH3.938 INCHES NOMINAL IN
OVERALL LENGTH ACROSS HORNS8.500 INCHES NOMINAL IN
MATERIALALUMINUM
SUBSTITUTES & CROSS-REFERENCES 1
8630-43-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 755143-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 755143-1?
755143-1 is a CLEAT,ROPE.
What parts can replace 755143-1?
There is 1 known substitute for 755143-1: 8630-43-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 755143-1?
755143-1 is cataloged in the U.S. Government catalog under NSN 5340-00-598-2873. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 755143-1