PartsTable
Technical Data Sheet
Download PDF

8630-43-1 — CLEAT,ROPE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8630-43-1: CLEAT,ROPE.

The CLEAT,ROPE is a the manufacturer industrial component. Key specifications include material: ALUMINUM, base_type: SINGLE, design_form: OPEN, overall_width: 3.938 INCHES NOMINAL IN, overall_height: 3.531 INCHES NOMINAL IN, overall_length: 10.000 INCHES NOMINAL BOTH ENDS IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-598-2873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8630-43-1
NSN: 5340-00-598-2873
FSC: 5340 — Hardware, Commercial
CAGE: 98042 — MARINETTE MARINE CORPORATION DBA MARINETTE MARINE CORP (USA)
SPECIFICATIONS
materialALUMINUM
base_typeSINGLE
design_formOPEN
overall_width3.938 INCHES NOMINAL IN
overall_height3.531 INCHES NOMINAL IN
overall_length10.000 INCHES NOMINAL BOTH ENDS IN
mounting_hole_diameter0.250 INCHES NOMINAL IN
mounting_hole_quantity20 OVERALL
overall_length_across_horns8.500 INCHES NOMINAL IN
NSN5340-00-598-2873
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8630-43-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 20 OVERALL
•
BASE TYPE: SINGLE
•
DESIGN FORM: OPEN
•
MOUNTING HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
OVERALL LENGTH ACROSS HORNS: 8.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY20 OVERALL
OVERALL HEIGHT3.531 INCHES NOMINAL IN
BASE TYPESINGLE
DESIGN FORMOPEN
MOUNTING HOLE DIAMETER0.250 INCHES NOMINAL IN
OVERALL LENGTH10.000 INCHES NOMINAL BOTH ENDS IN
OVERALL WIDTH3.938 INCHES NOMINAL IN
OVERALL LENGTH ACROSS HORNS8.500 INCHES NOMINAL IN
MATERIALALUMINUM
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 8630-43-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8630-43-1?
8630-43-1 is a CLEAT,ROPE.
What is the NSN for 8630-43-1?
8630-43-1 is cataloged in the U.S. Government catalog under NSN 5340-00-598-2873. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8630-43-1