PartsTable
Technical Data Sheet
Download PDF

7521-24 — SCREW,ASSEMBLED WASHER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

7521-24: SCREW,ASSEMBLED WASHER.

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL, overall_depth: 24.0 INCHES NOMINAL IN, overall_width: 36.0 INCHES NOMINAL IN, overall_height: 87.0 INCHES NOMINAL IN, closed_back_feature: INCLUDED, supplementary_features: SHELF CAPACITY IS 1250.O LBS OF EVENLY DISTRIBUTED WEIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-655-9410, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7521-24
NSN: 5305-00-655-9410
NIINs: 006559410, 016477744
FSC: 5305 — Screws
CAGE: 36470 — LIONEL CORP (USA)
SPECIFICATIONS
materialSTEEL
overall_depth24.0 INCHES NOMINAL IN
overall_width36.0 INCHES NOMINAL IN
overall_height87.0 INCHES NOMINAL IN
closed_back_featureINCLUDED
fixed_shelf_quantity6
supplementary_featuresSHELF CAPACITY IS 1250.O LBS OF EVENLY DISTRIBUTED WEIGHT
part_name_assigned_by_controlling_agencyCLOSED SHELVING,EXTRA HEAVY-DUTY
NSN5305-00-655-9410
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 7521-24 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.156 INCHES NOMINAL IN
•
PRIMARY WASHER OUTSIDE DIAMETER: 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.120 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: PAN
•
PRIMARY WASHER STYLE: FLAT INTERNAL TEETH
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
FASTENER LENGTH0.156 INCHES NOMINAL IN
PRIMARY WASHER OUTSIDE DIAMETER0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
THREAD LENGTH0.120 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEPAN
PRIMARY WASHER STYLEFLAT INTERNAL TEETH
THREAD DIRECTIONRIGHT-HAND
PRIMARY WASHER MATERIAL THICKNESS0.012 INCHES NOMINAL IN
SURFACE TREATMENTPAINT OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
1202-61-50Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-92BReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7521-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7521-24?
7521-24 is a SCREW,ASSEMBLED WASHER.
What parts can replace 7521-24?
There are 2 known substitutes for 7521-24: 1202-61-50, FF-S-92B. Substitute compatibility should be verified for your specific system.
What is the NSN for 7521-24?
7521-24 is cataloged in the U.S. Government catalog under NSN 5305-00-655-9410. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7521-24