PartsTable
Technical Data Sheet
Download PDF

1202-61-50 — SCREW,ASSEMBLED WASHER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

1202-61-50: SCREW,ASSEMBLED WASHER.

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: PAN, head_height: 0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN, thread_length: 0.120 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-655-9410, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1202-61-50
NSN: 5305-00-655-9410
FSC: 5305 — Screws
CAGE: 79189 — WARREN BOAT YARD INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_stylePAN
head_height0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
thread_length0.120 INCHES MINIMUM IN
fastener_length0.156 INCHES NOMINAL IN
washer_quantity1
thread_directionRIGHT-HAND
surface_treatmentPAINT OVERALL
internal_drive_styleSLOT
primary_washer_styleFLAT INTERNAL TEETH
NSN5305-00-655-9410
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1202-61-50 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.156 INCHES NOMINAL IN
•
PRIMARY WASHER OUTSIDE DIAMETER: 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.120 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: PAN
•
PRIMARY WASHER STYLE: FLAT INTERNAL TEETH
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
FASTENER LENGTH0.156 INCHES NOMINAL IN
PRIMARY WASHER OUTSIDE DIAMETER0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
THREAD LENGTH0.120 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEPAN
PRIMARY WASHER STYLEFLAT INTERNAL TEETH
THREAD DIRECTIONRIGHT-HAND
PRIMARY WASHER MATERIAL THICKNESS0.012 INCHES NOMINAL IN
SURFACE TREATMENTPAINT OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
FF-S-92BReference document
Same NSN cross-reference
Reference document — Identification reference
7521-24Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1202-61-50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1202-61-50?
1202-61-50 is a SCREW,ASSEMBLED WASHER.
What parts can replace 1202-61-50?
There are 2 known substitutes for 1202-61-50: FF-S-92B, 7521-24. Substitute compatibility should be verified for your specific system.
What is the NSN for 1202-61-50?
1202-61-50 is cataloged in the U.S. Government catalog under NSN 5305-00-655-9410. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1202-61-50