PartsTable / COMPONENT / 7502F
7502F
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.375 INCHES NOMINAL IN, overall_length: 0.625 INCHES NOMINAL IN, style_designator: CURVED ARCH. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-682-2175, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
7502F
NSN: 5340-00-682-2175 FSC: 5340 CAGE: 00194 — WALSCO ELECTRONICS CORP (USA)
SPECIFICATIONS
cushion NOT INCLUDED material STEEL LOCATION NOT OTHERWISE SPECIFIED mounting_pad NOT INCLUDED overall_width 0.375 INCHES NOMINAL IN overall_length 0.625 INCHES NOMINAL IN style_designator CURVED ARCH surface_treatment NICKEL material_thickness 0.031 INCHES NOMINAL IN mounting_hole_size 0.125 INCHES NOMINAL IN inside_diameter/arch_length 0.250 INCHES NOMINAL IN distance_between_base_and_inside_of_arch 0.188 INCHES NOMINAL IN center_to_center_distance_between_arch_and_mounting_hole 0.563 INCHES NOMINAL IN NSN 5340-00-682-2175
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 7502F
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MOUNTING HOLE SIZE: 0.125 INCHES NOMINAL IN
• MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
• SURFACE TREATMENT: NICKEL
• STYLE DESIGNATOR: CURVED ARCH
• INSIDE DIAMETER/ARCH LENGTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE SIZE 0.125 INCHES NOMINAL IN OVERALL WIDTH 0.375 INCHES NOMINAL IN MATERIAL STEEL LOCATION NOT OTHERWISE SPECIFIED SURFACE TREATMENT NICKEL STYLE DESIGNATOR CURVED ARCH CUSHION NOT INCLUDED INSIDE DIAMETER/ARCH LENGTH 0.250 INCHES NOMINAL IN OVERALL LENGTH 0.625 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE 0.563 INCHES NOMINAL IN MATERIAL THICKNESS 0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
0-12134 Interchangeable interchangeable cross-reference
interchangeable
6251G Interchangeable interchangeable cross-reference
interchangeable
55062 Interchangeable interchangeable cross-reference
interchangeable
8497-63-2 Interchangeable interchangeable cross-reference
interchangeable
14149-2 Interchangeable interchangeable cross-reference
interchangeable
6251C Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 7502F?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7502F?
7502F is a STRAP,RETAINING.
What parts can replace 7502F?
There are 8 known substitutes for 7502F: 0-12134, 6251G, 55062 and 5 more. Substitute compatibility should be verified for your specific system.
Is 7502F still available?
7502F is currently cancelled.