PartsTable / COMPONENT / 6251C
6251C
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The VALVE,GLOBE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY BODY, seat_angle: 37.0 DEGREES ALL ENDS, bonnet_type: INSIDE SCREW, thread_class: 3A ALL ENDS A, connection_type: THREADED EXTERNAL TUBE ALL ENDS, connection_style: FLARED (TUBE) ALL ENDS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-682-2175, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
6251C
NSN: 5340-00-682-2175 FSC: 5340 CAGE: 72653 — GC/WALDOM INC (USA)
SPECIFICATIONS
material COPPER ALLOY BODY seat_angle 37.0 DEGREES ALL ENDS bonnet_type INSIDE SCREW thread_class 3A ALL ENDS A connection_type THREADED EXTERNAL TUBE ALL ENDS connection_style FLARED (TUBE) ALL ENDS style_designator STRAIGHT THRU thread_direction RIGHT-HAND ALL ENDS mounting_facility LUG(S) operating_pressure 265.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS flow_control_device PISTON nominal_thread_size 0.437 INCHES ALL ENDS IN NSN 5340-00-682-2175
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 6251C
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MOUNTING HOLE SIZE: 0.125 INCHES NOMINAL IN
• MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
• SURFACE TREATMENT: NICKEL
• STYLE DESIGNATOR: CURVED ARCH
• INSIDE DIAMETER/ARCH LENGTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE SIZE 0.125 INCHES NOMINAL IN OVERALL WIDTH 0.375 INCHES NOMINAL IN MATERIAL STEEL LOCATION NOT OTHERWISE SPECIFIED SURFACE TREATMENT NICKEL STYLE DESIGNATOR CURVED ARCH CUSHION NOT INCLUDED INSIDE DIAMETER/ARCH LENGTH 0.250 INCHES NOMINAL IN OVERALL LENGTH 0.625 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE 0.563 INCHES NOMINAL IN MATERIAL THICKNESS 0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
0-12134 Interchangeable interchangeable cross-reference
interchangeable
6251G Interchangeable interchangeable cross-reference
interchangeable
55062 Interchangeable interchangeable cross-reference
interchangeable
8497-63-2 Interchangeable interchangeable cross-reference
interchangeable
14149-2 Interchangeable interchangeable cross-reference
interchangeable
6251C Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 6251C?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6251C?
6251C is a VALVE,GLOBE.
What parts can replace 6251C?
There are 9 known substitutes for 6251C: 0-12134, 6251G, 55062 and 6 more. Substitute compatibility should be verified for your specific system.
Is 6251C still available?
6251C is currently cancelled.