PartsTable
Technical Data Sheet
Download PDF

7377441 — SPRING ASSEMBLY,LEAF

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7377441: SPRING ASSEMBLY,LEAF.

The SPRING ASSEMBLY,LEAF is a the manufacturer industrial component. Key specifications include material: STEEL COMP 9260 OVERALL, design_type: MAINSPRING, bushing_type: PLAIN, elliptic_shape: SEMI, spring_deflection_rate: 902.000 POUNDS PER INCH MINIMUM AND 998.000 POUNDS PER INCH MAXIMUM LBS, material_hardness_rating: 38.8 ROCKWELL C MINIMUM AND 46.9 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-579-9675, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7377441
NSN: 5331-00-579-9675
NIINs: 005799675, 007377441
FSC: 5331 — O-ring
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 9260 OVERALL
design_typeMAINSPRING
bushing_typePLAIN
elliptic_shapeSEMI
rebound_clip_quantity5
spring_deflection_rate902.000 POUNDS PER INCH MINIMUM AND 998.000 POUNDS PER INCH MAXIMUM LBS
material_hardness_rating38.8 ROCKWELL C MINIMUM AND 46.9 ROCKWELL C MAXIMUM
spring_length_under_load45.469 INCHES MINIMUM AND 45.719 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-624,AMEND 2-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5331-00-579-9675
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7377441 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 7.473 INCHES MINIMUM AND 7.577 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 6.952 INCHES MINIMUM AND 6.998 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
OUTSIDE DIAMETER7.473 INCHES MINIMUM AND 7.577 INCHES MAXIMUM IN
CENTER HOLE DIAMETER6.952 INCHES MINIMUM AND 6.998 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
MILP25732Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS28784-441Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS28775-441Reference document
Same NSN cross-reference
Reference document — Secondary reference
N30-75-441Reference document
Same NSN cross-reference
Reference document — Secondary reference
1446-441Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-AS28775Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7377441?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7377441?
7377441 is a SPRING ASSEMBLY,LEAF.
What parts can replace 7377441?
There are 8 known substitutes for 7377441: MILP25732, MS28784-441, MS28775-441 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7377441?
7377441 is cataloged in the U.S. Government catalog under NSN 5331-00-579-9675. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7377441