PartsTable
Technical Data Sheet
Download PDF

N30-75-441 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

N30-75-441: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 7.473 INCHES MINIMUM AND 7.577 INCHES MAXIMUM IN, center_hole_diameter: 6.952 INCHES MINIMUM AND 6.998 INCHES MAXIMUM IN, cross-sectional_height: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-579-9675, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N30-75-441
NSN: 5331-00-579-9675
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter7.473 INCHES MINIMUM AND 7.577 INCHES MAXIMUM IN
center_hole_diameter6.952 INCHES MINIMUM AND 6.998 INCHES MAXIMUM IN
cross-sectional_height0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
NSN5331-00-579-9675
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N30-75-441 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 7.473 INCHES MINIMUM AND 7.577 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 6.952 INCHES MINIMUM AND 6.998 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
OUTSIDE DIAMETER7.473 INCHES MINIMUM AND 7.577 INCHES MAXIMUM IN
CENTER HOLE DIAMETER6.952 INCHES MINIMUM AND 6.998 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
MILP25732Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS28784-441Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS28775-441Reference document
Same NSN cross-reference
Reference document — Secondary reference
1446-441Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7377-441Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-AS28775Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy N30-75-441?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N30-75-441?
N30-75-441 is a O-RING.
What parts can replace N30-75-441?
There are 8 known substitutes for N30-75-441: MILP25732, MS28784-441, MS28775-441 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N30-75-441?
N30-75-441 is cataloged in the U.S. Government catalog under NSN 5331-00-579-9675. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N30-75-441