PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7371045
7371045 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM IN, material: STEEL BAND, slot_width: 0.340 INCHES NOMINAL IN, slot_length: 0.460 INCHES NOMINAL IN, overall_width: 0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN, material_thickness: 0.089 INCHES MINIMUM AND 0.091 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-737-1045, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7371045
NSN: 5340-00-737-1045
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM IN
materialSTEEL BAND
slot_width0.340 INCHES NOMINAL IN
slot_length0.460 INCHES NOMINAL IN
overall_width0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
material_thickness0.089 INCHES MINIMUM AND 0.091 INCHES MAXIMUM IN
loop_inside_diameter3.050 INCHES MINIMUM AND 3.070 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end2.550 INCHES MINIMUM AND 2.570 INCHES MAXIMUM IN
distance_from_loop_center_to_short_tongue_end2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole2.020 INCHES MINIMUM AND 2.040 INCHES MAXIMUM IN
NSN5340-00-737-1045
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7371045 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SLOT WIDTH: 0.340 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.089 INCHES MINIMUM AND 0.091 INCHES MAXIMUM IN
•
MATERIAL: STEEL BAND
•
DISTANCE FROM LOOP CENTER TO SHORT TONGUE END: 2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.550 INCHES MINIMUM AND 2.570 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.020 INCHES MINIMUM AND 2.040 INCHES MAXIMUM IN
•
SLOT LENGTH: 0.460 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 3.050 INCHES MINIMUM AND 3.070 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SLOT WIDTH0.340 INCHES NOMINAL IN
MATERIAL THICKNESS0.089 INCHES MINIMUM AND 0.091 INCHES MAXIMUM IN
MATERIALSTEEL BAND
DISTANCE FROM LOOP CENTER TO SHORT TONGUE END2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.550 INCHES MINIMUM AND 2.570 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.020 INCHES MINIMUM AND 2.040 INCHES MAXIMUM IN
SLOT LENGTH0.460 INCHES NOMINAL IN
LOOP INSIDE DIAMETER3.050 INCHES MINIMUM AND 3.070 INCHES MAXIMUM IN
DIAMETER0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM IN
OVERALL WIDTH0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
PD-327Interchangeable
interchangeable cross-reference
interchangeable
A655Interchangeable
interchangeable cross-reference
interchangeable
103KDInterchangeable
interchangeable cross-reference
interchangeable
613376Interchangeable
interchangeable cross-reference
interchangeable
D77033Interchangeable
interchangeable cross-reference
interchangeable
GPW5264AInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7371045?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7371045?
7371045 is a CLAMP,LOOP.
What parts can replace 7371045?
There are 7 known substitutes for 7371045: PD-327, A655, 103KD and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7371045?
7371045 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-737-1045. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7371045

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026