PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7346933
7346933 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,AIRCRAFT SE is a the manufacturer industrial component. Key specifications include end_item_identification: ACFT,MODEL OV-10. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-495-9621, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7346933
NSN: 5340-00-495-9621
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
end_item_identificationACFT,MODEL OV-10
NSN5340-00-495-9621
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7346933 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
LOOP INSIDE DIAMETER: 0.650 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0329 INCHES NOMINAL IN
•
DIAMETER: 0.250 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.900 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.630 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.750 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
LOOP INSIDE DIAMETER0.650 INCHES NOMINAL IN
MATERIAL THICKNESS0.0329 INCHES NOMINAL IN
DIAMETER0.250 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.900 INCHES NOMINAL IN
MATERIALSTEEL BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.630 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
60-671Interchangeable
interchangeable cross-reference
interchangeable
680-202Interchangeable
interchangeable cross-reference
interchangeable
60-671PC202Interchangeable
interchangeable cross-reference
interchangeable
78932Interchangeable
interchangeable cross-reference
interchangeable
6067Interchangeable
interchangeable cross-reference
interchangeable
60-468Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7346933?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7346933?
7346933 is a BRACKET,AIRCRAFT SE.
What parts can replace 7346933?
There are 11 known substitutes for 7346933: 60-671, 680-202, 60-671PC202 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7346933?
7346933 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-495-9621. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7346933

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026