PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7210035-015
7210035-015 ✓ Verified by PartsTable
— · SFP TRANSCEIVER
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE SET is a the manufacturer industrial component. Key specifications include overall_length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, mounting_method: TERMINAL, terminal_length: 1.500 INCHES MINIMUM IN, overall_diameter: 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN, special_features: JUNCTION PATTERN ARRANGEMENT: PNP, features_provided: HERMETICALLY SEALED CASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-985-9134, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7210035-015
NSN: 5961-00-985-9134
FSC: 5961
CAGE: 05157 — COHU, INC. DBA COHU ELECTRONIC'S DIVISION DIV ELECTRONICS DIVISION (USA)
SPECIFICATIONS
overall_length0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
mounting_methodTERMINAL
terminal_length1.500 INCHES MINIMUM IN
overall_diameter0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
special_featuresJUNCTION PATTERN ARRANGEMENT: PNP
features_providedHERMETICALLY SEALED CASE
internal_configurationJUNCTION CONTACT
semiconductor_materialGERMANIUM
terminal_circle_diameter0.200 INCHES NOMINAL IN
terminal_type_and_quantity3 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-S-19500/20 GOVERNMENT SPECIFICATION
power_rating_per_characteristic150.0 MILLIWATTS MAXIMUM COLLECTOR POWER DISSIPATION
NSN5961-00-985-9134
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN 7210035-015 MFR OEM SEMICONDUCTOR DEVICE SET
KEY FEATURES
•
TERMINAL TYPE AND QUANTITY: 3 UNINSULATED WIRE LEAD
•
TERMINAL LENGTH: 1.500 INCHES MINIMUM IN
•
CURRENT RATING PER CHARACTERISTIC: -200.00 MILLIAMPERES MAXIMUM COLLECTOR CURRENT, DC AND 200.00 MILLIAMPERES MAXIMUM EMITTER CURRENT, DC
•
INTERNAL CONFIGURATION: JUNCTION CONTACT
•
TEST DATA DOCUMENT: 81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC: -40.0 MAXIMUM COLLECTOR TO BASE VOLTAGE, DC AND -35.0 MAXIMUM COLLECTOR TO EMITTER VOLTAGE, DC AND -25.0 MAXIMUM EMITTER TO BASE VOLTAGE, INSTANTANEOUS
TECHNICAL CHARACTERISTICS (FLIS)
TERMINAL TYPE AND QUANTITY3 UNINSULATED WIRE LEAD
TERMINAL LENGTH1.500 INCHES MINIMUM IN
CURRENT RATING PER CHARACTERISTIC-200.00 MILLIAMPERES MAXIMUM COLLECTOR CURRENT, DC AND 200.00 MILLIAMPERES MAXIMUM EMITTER CURRENT, DC
INTERNAL CONFIGURATIONJUNCTION CONTACT
TEST DATA DOCUMENT81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIAL FEATURESJUNCTION PATTERN ARRANGEMENT: PNP
OVERALL LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC-40.0 MAXIMUM COLLECTOR TO BASE VOLTAGE, DC AND -35.0 MAXIMUM COLLECTOR TO EMITTER VOLTAGE, DC AND -25.0 MAXIMUM EMITTER TO BASE VOLTAGE, INSTANTANEOUS
MOUNTING METHODTERMINAL
TERMINAL CIRCLE DIAMETER0.200 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
10125204-1Interchangeable
interchangeable cross-reference
interchangeable
2N404AInterchangeable
interchangeable cross-reference
interchangeable
PST-1000Interchangeable
interchangeable cross-reference
interchangeable
CT210Interchangeable
interchangeable cross-reference
interchangeable
BT-102Interchangeable
interchangeable cross-reference
interchangeable
BT-6/12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 7210035-015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7210035-015?
7210035-015 is a SEMICONDUCTOR DEVICE SET.
What parts can replace 7210035-015?
There are 22 known substitutes for 7210035-015: 10125204-1, 2N404A, PST-1000 and 19 more. Substitute compatibility should be verified for your specific system.
Is 7210035-015 still available?
7210035-015 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7210035-015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026