PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 71C62A
71C62A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN, outside_diameter: 2.066 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-904-4821, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
71C62A
NSN: 5330-00-904-4821
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
outside_diameter2.066 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.062 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.375 INCHES NOMINAL IN
NSN5330-00-904-4821
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 71C62A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: STEEL CASE
•
SURFACE TREATMENT: PLASTIC CASE
•
ACCOMMODATED SHAFT DIAMETER: 1.375 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.066 INCHES NOMINAL IN
•
SEAL WIDTH: 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
SURFACE TREATMENTPLASTIC CASE
ACCOMMODATED SHAFT DIAMETER1.375 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
OUTSIDE DIAMETER2.066 INCHES NOMINAL IN
SEAL WIDTH0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
HOUSING BORE DIAMETER2.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
11A822301Interchangeable
interchangeable cross-reference
interchangeable
7113071Interchangeable
interchangeable cross-reference
interchangeable
R114-1AInterchangeable
interchangeable cross-reference
interchangeable
700026Interchangeable
interchangeable cross-reference
interchangeable
R6Interchangeable
interchangeable cross-reference
interchangeable
SSR6X3AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 71C62A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71C62A?
71C62A is a SEAL,PLAIN ENCASED.
What parts can replace 71C62A?
There are 8 known substitutes for 71C62A: 11A822301, 7113071, R114-1A and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 71C62A?
71C62A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-904-4821. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71C62A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026