PartsTable / COMPONENT / 7118G
7118G
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: PAPER OVERALL, hole_diameter: 0.344 INCHES NOMINAL ALL HOLES IN, overall_width: 1.500 INCHES NOMINAL IN, aperture_width: 0.812 INCHES NOMINAL IN, overall_height: 1.250 INCHES NOMINAL IN, overall_length: 3.625 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-7272, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
7118G
NSN: 5330-00-297-7272 FSC: 5330 CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
material PAPER OVERALL hole_diameter 0.344 INCHES NOMINAL ALL HOLES IN overall_width 1.500 INCHES NOMINAL IN aperture_width 0.812 INCHES NOMINAL IN overall_height 1.250 INCHES NOMINAL IN overall_length 3.625 INCHES NOMINAL IN aperture_length 2.125 INCHES NOMINAL IN style_designator NON-CIRCULAR mating_end_quantity 1 inside_corner_radius 0.125 INCHES NOMINAL IN end_item_identification MRAP BUFFALO MK2A2 cross-sectional_thickness 0.009 INCHES NOMINAL IN NSN 5330-00-297-7272
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 7118G
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• APERTURE LENGTH: 2.125 INCHES NOMINAL IN
• HOLE DIAMETER: 0.344 INCHES NOMINAL ALL HOLES IN
• CROSS-SECTIONAL THICKNESS: 0.009 INCHES NOMINAL IN
• APERTURE WIDTH: 0.812 INCHES NOMINAL IN
• INSIDE CORNER RADIUS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE LENGTH 2.125 INCHES NOMINAL IN HOLE DIAMETER 0.344 INCHES NOMINAL ALL HOLES IN END ITEM IDENTIFICATION MRAP BUFFALO MK2A2 OVERALL LENGTH 3.375 INCHES NOMINAL IN CROSS-SECTIONAL THICKNESS 0.009 INCHES NOMINAL IN MATERIAL PAPER OVERALL APERTURE WIDTH 0.812 INCHES NOMINAL IN INSIDE CORNER RADIUS 0.125 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH 2.750 INCHES NOMINAL ALL HOLES IN OVERALL WIDTH 1.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
ND250187 Interchangeable interchangeable cross-reference
interchangeable
238 Interchangeable interchangeable cross-reference
interchangeable
276293 Interchangeable interchangeable cross-reference
interchangeable
AS63 Interchangeable interchangeable cross-reference
interchangeable
51-10622 Interchangeable interchangeable cross-reference
interchangeable
716-030515 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 7118G?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7118G?
7118G is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 7118G?
There are 21 known substitutes for 7118G: ND250187, 238, 276293 and 18 more. Substitute compatibility should be verified for your specific system.
Is 7118G still available?
7118G is currently cancelled.