PartsTable
Technical Data Sheet
Download PDF

236170 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

236170: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, hole_diameter: 0.340 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.380 INCHES NOMINAL IN, aperture_width: 0.810 INCHES NOMINAL IN, overall_length: 3.370 INCHES NOMINAL IN, aperture_length: 2.120 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-297-7272, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
236170
NSN: 5330-00-297-7272
NIINs: 002977272, 010868595
FSC: 5330 — Packing and Gasket Materials
CAGE: 06853 — BENDIX COMMERCIAL VEHICLE SYSTEMS LLC DBA BENDIX COMMERCIAL VEHICLE SYSTEMS (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
hole_diameter0.340 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.380 INCHES NOMINAL IN
aperture_width0.810 INCHES NOMINAL IN
overall_length3.370 INCHES NOMINAL IN
aperture_length2.120 INCHES NOMINAL IN
bolt_hole_quantity2
inside_corner_radius0.120 INCHES NOMINAL IN
cross-sectional_thickness0.014 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationBW-239-M,FSCM 08653 MFR REF SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_bolt_holes_along_length2.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-297-7272
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 236170 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.009 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 0.812 INCHES NOMINAL IN
•
APERTURE LENGTH: 2.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.009 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.125 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH3.375 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.375 INCHES NOMINAL IN
APERTURE WIDTH0.812 INCHES NOMINAL IN
APERTURE LENGTH2.125 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.750 INCHES NOMINAL ALL HOLES IN
END ITEM IDENTIFICATIONMRAP BUFFALO MK2A2
SUBSTITUTES & CROSS-REFERENCES 7
7118GSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
XT35525PC43Reference document
Same NSN cross-reference
Reference document — Secondary reference
33809Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5110410Reference document
Same NSN cross-reference
Reference document — Secondary reference
10503234Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
6B236170Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 236170?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 236170?
236170 is a GASKET.
What parts can replace 236170?
There are 7 known substitutes for 236170: 7118G, XT35525PC43, 33809 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 236170?
236170 is cataloged in the U.S. Government catalog under NSN 5330-00-297-7272. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 236170

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.