PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 71086
71086 ✓ Verified by PartsTable
Trust · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

<b>Set of wireless transmitter and doorbell chime with 5 different melodies, 4 volume levels and LED indicator.</b><br><br>- Chime can easily be placed in any indoor socket<br>- The included build-in transmitter allows to activate the chime with an existing doorbell<br>- 5 melodies and 4 volume levels<br>- Possible to assign different melodies to different transmitters<br>- Led indicator that clearly indicates when the chime is activated This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-248-0039, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
71086
NSN: 5315-00-248-0039
FSC: 5315
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialPLASTIC ACETAL OVERALL
thickness0.028 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
body_width0.688 INCHES NOMINAL IN
body_height0.734 INCHES NOMINAL IN
body_length1.438 INCHES NOMINAL IN
hole_diameter0.078 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
inclosure_typeHERMETICALLY SEALED
first_end_styleCHAMFERED
hardness_rating36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
mounting_methodFLANGE AND UNTHREADED HOLE(S) SINGLE GROUP
frequency_rating60.0 HERTZ NOMINAL SINGLE COMPONENT
overall_diameter0.140 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
NSN5315-00-248-0039
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 71086 · Trust ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL DIAMETER: 0.3120 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL LENGTH: 0.812 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 3135 OVERALL
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL DIAMETER0.3120 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL LENGTH0.812 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 3135 OVERALL
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
71086Interchangeable
interchangeable cross-reference
interchangeable
1365Interchangeable
interchangeable cross-reference
interchangeable
204153Interchangeable
interchangeable cross-reference
interchangeable
071086Interchangeable
Same NIIN cross-reference
interchangeable
0071086-3Interchangeable
Same NIIN cross-reference
interchangeable
0071086Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 71086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71086?
71086 is a TRANSFORMER,POWER manufactured by Trust.
What parts can replace 71086?
There are 6 known substitutes for 71086: 71086, 1365, 204153 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 71086?
71086 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-248-0039. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71086

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026