PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0071086-3
0071086-3 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 3135 OVERALL, first_end_style: CHAMFERED, hardness_rating: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL, pin_overall_length: 0.812 INCHES NOMINAL IN, pin_overall_diameter: 0.3120 INCHES NOMINAL IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-248-0039, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0071086-3
NSN: 5315-00-248-0039
FSC: 5315
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialSTEEL COMP 3135 OVERALL
first_end_styleCHAMFERED
hardness_rating36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
pin_overall_length0.812 INCHES NOMINAL IN
pin_overall_diameter0.3120 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-248-0039
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0071086-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL DIAMETER: 0.3120 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL LENGTH: 0.812 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 3135 OVERALL
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL DIAMETER0.3120 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL LENGTH0.812 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 3135 OVERALL
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
71086Interchangeable
interchangeable cross-reference
interchangeable
1365Interchangeable
interchangeable cross-reference
interchangeable
204153Interchangeable
interchangeable cross-reference
interchangeable
071086Interchangeable
Same NIIN cross-reference
interchangeable
0071086Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0071086-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0071086-3?
0071086-3 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 0071086-3?
There are 5 known substitutes for 0071086-3: 71086, 1365, 204153 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0071086-3?
0071086-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-248-0039. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0071086-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026