PartsTable
Technical Data Sheet
PartsTable / O-RING / 710594
710594 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, center_hole_diameter: 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN, cross-sectional_height: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-942-1863, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
710594
NSN: 5331-00-942-1863
FSC: 5331 — O-RING
CAGE: 59501 — UNISON INDUSTRIES LLC (USA)
SPECIFICATIONS
materialRUBBER
center_hole_diameter0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
cross-sectional_height0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
NSN5331-00-942-1863
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 710594 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER
•
CROSS-SECTIONAL HEIGHT: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER
CROSS-SECTIONAL HEIGHT0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
GAP7205TInterchangeable
interchangeable cross-reference
interchangeable
7035-1Interchangeable
interchangeable cross-reference
interchangeable
8387Interchangeable
interchangeable cross-reference
interchangeable
8021-2Interchangeable
interchangeable cross-reference
interchangeable
10554939Interchangeable
interchangeable cross-reference
interchangeable
70351/710594Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 710594?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 710594?
710594 is a O-RING.
What parts can replace 710594?
There are 6 known substitutes for 710594: GAP7205T, 7035-1, 8387 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 710594?
710594 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-942-1863. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 710594

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026