PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7092-125204
7092-125204 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM TUBE, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, exterior_color: RED, inside_diameter: 1.250 INCHES NOMINAL IN, outside_diameter: 1.730 INCHES NOMINAL IN, operating_pressure: 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-151-6717, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7092-125204
NSN: 4720-00-151-6717
FSC: 4720
CAGE: 87373 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV HOSE PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM TUBE
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
exterior_colorRED
inside_diameter1.250 INCHES NOMINAL IN
outside_diameter1.730 INCHES NOMINAL IN
operating_pressure150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
hydrostatic_test_pressure300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
minimum_inside_bending_radius10.000 INCHES IN
layer_composition_and_location1ST LAYER BRAIDED SYNTHETIC CORD AND 2ND LAYER BRAIDED SYNTHETIC CORD AND OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE
NSN4720-00-151-6717
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 7092-125204 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTERIOR COLOR: RED
•
MINIMUM INSIDE BENDING RADIUS: 10.000 INCHES IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED SYNTHETIC CORD AND 2ND LAYER BRAIDED SYNTHETIC CORD AND OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE
•
INSIDE SURFACE CONDITION: SMOOTH
•
OPERATING PRESSURE: 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
OUTER COVERING ENVIRONMENTAL PROTECTION: HEAT RESISTANT AND WATER RESISTANT
•
HYDROSTATIC TEST PRESSURE: 300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
EXTERIOR COLORRED
MINIMUM INSIDE BENDING RADIUS10.000 INCHES IN
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED SYNTHETIC CORD AND 2ND LAYER BRAIDED SYNTHETIC CORD AND OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE
INSIDE SURFACE CONDITIONSMOOTH
OPERATING PRESSURE150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
OUTER COVERING ENVIRONMENTAL PROTECTIONHEAT RESISTANT AND WATER RESISTANT
HYDROSTATIC TEST PRESSURE300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM TUBE
CROSS-SECTIONAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
A-1-156Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-14652BInterchangeable
interchangeable cross-reference
interchangeable
MIL-I-14652Interchangeable
interchangeable cross-reference
interchangeable
1281-3018Interchangeable
interchangeable cross-reference
interchangeable
H57324PC30Interchangeable
interchangeable cross-reference
interchangeable
D8523841REVAPC42Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7092-125204?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7092-125204?
7092-125204 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 7092-125204?
There are 18 known substitutes for 7092-125204: A-1-156, MIL-DTL-14652B, MIL-I-14652 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7092-125204?
7092-125204 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-151-6717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7092-125204

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026