PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7090SH8GS
7090SH8GS ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: GLASS FIBER CUSHION, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.020 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-808-4165, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7090SH8GS
NSN: 5340-00-808-4165
FSC: 5340
CAGE: 72285 — EXACTO INDUSTRIES INC (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialGLASS FIBER CUSHION
overall_width0.375 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.020 INCHES NOMINAL IN
loop_inside_diameter0.500 INCHES NOMINAL IN
cushioning_environmental_protectionOIL RESISTANT
material_document_and_classificationMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.780 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.592 INCHES NOMINAL IN
NSN5340-00-808-4165
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7090SH8GS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL: STEEL CORROSION RESISTING BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.592 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOROFFSET MOUNT
MATERIALSTEEL CORROSION RESISTING BAND
MATERIALGLASS FIBER CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
OVERALL WIDTH0.375 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.592 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.780 INCHES NOMINAL IN
CUSHIONING ENVIRONMENTAL PROTECTIONOIL RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
TA1716H8FGInterchangeable
interchangeable cross-reference
interchangeable
471-8Interchangeable
interchangeable cross-reference
interchangeable
TA1720H8FGInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7090SH8GS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7090SH8GS?
7090SH8GS is a CLAMP,LOOP.
What parts can replace 7090SH8GS?
There are 3 known substitutes for 7090SH8GS: TA1716H8FG, 471-8, TA1720H8FG. Substitute compatibility should be verified for your specific system.
What is the NSN for 7090SH8GS?
7090SH8GS is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-808-4165. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7090SH8GS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026