PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TA1716H8FG
TA1716H8FG ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.020 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-597-9392, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA1716H8FG
NSN: 5340-00-597-9392
FSC: 5340
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.020 INCHES NOMINAL IN
loop_inside_diameter0.500 INCHES NOMINAL IN
cushioning_environmental_protectionHYDRAULIC FLUID
material_document_and_classificationMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.818 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.615 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
NSN5340-00-597-9392
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA1716H8FG MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
CUSHIONING ENVIRONMENTAL PROTECTION: HYDRAULIC FLUID
•
MATERIAL: GLASS FIBER CUSHION
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.615 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DIAMETER: 0.204 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
CUSHIONING ENVIRONMENTAL PROTECTIONHYDRAULIC FLUID
MATERIALGLASS FIBER CUSHION
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.615 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
STYLE DESIGNATOROFFSET MOUNT
MATERIALSTEEL CORROSION RESISTING BAND
DIAMETER0.204 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
4718Upgraded Successor
successor cross-reference
successor
VENOCATH CATETER 18GUpgraded Successor
successor cross-reference
successor
4718-10010Interchangeable
interchangeable cross-reference
interchangeable
30139AInterchangeable
interchangeable cross-reference
interchangeable
3C1087-37Interchangeable
interchangeable cross-reference
interchangeable
10-30051Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TA1716H8FG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA1716H8FG?
TA1716H8FG is a CLAMP,LOOP.
What parts can replace TA1716H8FG?
There are 13 known substitutes for TA1716H8FG: 4718, VENOCATH CATETER 18G, 4718-10010 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TA1716H8FG?
TA1716H8FG is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-597-9392. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA1716H8FG

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026