PartsTable
Technical Data Sheet
Download PDF

7069195 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7069195: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 1.458 INCHES MINIMUM AND 1.478 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_length: 4.609 INCHES MINIMUM AND 4.641 INCHES MAXIMUM IN, surface_finish: 125.0 MICROINCHES SHANK END, undercut_width: 0.256 INCHES NOMINAL IN, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-706-9195, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7069195
NSN: 5315-00-706-9195
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter1.458 INCHES MINIMUM AND 1.478 INCHES MAXIMUM IN
materialSTEEL OVERALL
overall_length4.609 INCHES MINIMUM AND 4.641 INCHES MAXIMUM IN
surface_finish125.0 MICROINCHES SHANK END
undercut_width0.256 INCHES NOMINAL IN
first_end_styleCHAMFERED
hardness_rating230.0 BRINELL HULTGREN MINIMUM AND 283.0 BRINELL HULTGREN MAXIMUM OVERALL
undercut_radius0.128 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
effective_length3.744 INCHES NOMINAL IN
style_designatorGROOVE
surface_treatmentZINC AND CHROMATE OVERALL
undercut_diameter1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN
NSN5315-00-706-9195
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7069195 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES SHANK END
•
UNDERCUT WIDTH: 0.256 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
UNDERCUT DIAMETER: 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN
•
FIRST END LOCATION: BOTH ENDS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES SHANK END
UNDERCUT WIDTH0.256 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
UNDERCUT DIAMETER1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN
FIRST END LOCATIONBOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-Z-325,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.281 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
HARDNESS RATING230.0 BRINELL HULTGREN MINIMUM AND 283.0 BRINELL HULTGREN MAXIMUM OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 3
0729902Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5315PL2170203Reference document
Same NSN cross-reference
Reference document — Informative reference only
5315007069195Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7069195?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7069195?
7069195 is a PIN,GROOVED,HEADLESS.
What parts can replace 7069195?
There are 3 known substitutes for 7069195: 0729902, 5315PL2170203, 5315007069195. Substitute compatibility should be verified for your specific system.
What is the NSN for 7069195?
7069195 is cataloged in the U.S. Government catalog under NSN 5315-00-706-9195. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7069195

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.