The Pin,grooved,headless, cataloged under National Stock Number 5315-00-706-9195, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is U S Army Tank Automotive Command Amsta-Im-Mm. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-706-9195 |
| Primary Part Number | 7069195 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | U S Army Tank Automotive Command Amsta-Im-Mm |
| Status | ACTIVE |
| Surface Finish | 125.0 MICROINCHES SHANK END |
| Undercut Width | 0.256 INCHES NOMINAL IN |
| First End Taper Length | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN |
| Undercut Diameter | 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Surface Treatment Document and Classification | QQ-Z-325,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Hole Arrangement Style | BOTH END DRILLED |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.281 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN |
| Hardness Rating | 230.0 BRINELL HULTGREN MINIMUM AND 283.0 BRINELL HULTGREN MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Diameter | 1.458 INCHES MINIMUM AND 1.478 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 3.744 INCHES NOMINAL IN |
| Second Hole Diameter | 0.281 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN |
| Second Undercut Width | 0.256 INCHES NOMINAL IN |
| Center to Center Distance Between Holes | 3.984 INCHES MINIMUM AND 4.016 INCHES MAXIMUM IN |
| Surface Treatment | ZINC AND CHROMATE OVERALL |
| Undercut Radius | 0.128 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN |
| Material | STEEL OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 0729902 | General Dynamics European, Land-Systems-Mowag Gmbh Dba Gdels (CHE) |
| 7069195 PRIMARY | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
| Reference | Meaning |
|---|---|
| 5315PL2170203 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
| 5315007069195 | 5/9 Secondary reference E.c.a Etablissement Centrald'approvisionnement Des Forces Armee |
NSN 5315-00-706-9195 is a Pin,grooved,headless, manufactured by U S Army Tank Automotive Command Amsta-Im-Mm, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-00-706-9195 has 2 manufacturer part numbers on file: 0729902 (General Dynamics European, Land-Systems-Mowag Gmbh Dba Gdels), 7069195 (U S Army Tank Automotive Command Amsta-Im-Mm).
Key specifications for 7069195: Surface Finish: 125.0 MICROINCHES SHANK END; Undercut Width: 0.256 INCHES NOMINAL IN; First End Taper Length: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN; Undercut Diameter: 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.