PartsTable
Technical Data Sheet
Download PDF

7051616 — ROLLER,LINEAR-ROTARY MOTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7051616: ROLLER,LINEAR-ROTARY MOTION.

The ROLLER,LINEAR-ROTARY MOTION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C, face_width: 0.324 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, outside_diameter: 0.433 INCHES MINIMUM AND 0.434 INCHES MAXIMUM IN, style_designator: PLAIN, bore_inside_diameter: 0.343 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN, casehardening_indicator: NOT CASEHARDENED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-054-1415, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7051616
NSN: 5340-00-054-1415
NIINs: 000541415, 008903208
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 440C
face_width0.324 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
outside_diameter0.433 INCHES MINIMUM AND 0.434 INCHES MAXIMUM IN
style_designatorPLAIN
bore_inside_diameter0.343 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
casehardening_indicatorNOT CASEHARDENED
metallic_hardness_rating53.0 MINIMUM ROCKWELL C AND 58.0 MAXIMUM ROCKWELL C
material_document_and_classificationQQ-S-763, CLASS 440C, COND A FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-054-1415
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7051616 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RADIUS: 3.250 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CONCAVE
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL THICKNESS: 0.083 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OR ZINC
•
MATERIAL: STEEL COMP 1010
TECHNICAL CHARACTERISTICS
RADIUS3.250 INCHES NOMINAL IN
OUTSIDE DIAMETER2.125 INCHES NOMINAL IN
STYLE DESIGNATORCONCAVE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL THICKNESS0.083 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC
MATERIALSTEEL COMP 1010
SUBSTITUTES & CROSS-REFERENCES 3
N132Reference document
Same NSN cross-reference
Reference document — Secondary reference
172593Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
114941Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7051616?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7051616?
7051616 is a ROLLER,LINEAR-ROTARY MOTION.
What parts can replace 7051616?
There are 3 known substitutes for 7051616: N132, 172593, 114941. Substitute compatibility should be verified for your specific system.
What is the NSN for 7051616?
7051616 is cataloged in the U.S. Government catalog under NSN 5340-00-054-1415. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7051616