PartsTable
Technical Data Sheet
Download PDF

N132 — LIGHT EMITTING DIODE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

N132: LIGHT EMITTING DIODE.

The LIGHT EMITTING DIODE is a the manufacturer industrial component. Key specifications include radius: 3.250 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, overall_width: 0.312 INCHES NOMINAL IN, overall_height: 0.312 INCHES NOMINAL IN, overall_length: 0.890 INCHES NOMINAL IN, mounting_method: THREADED STUD(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-00-054-1415, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N132
NSN: 5340-00-054-1415
NIINs: 000541415, 003667987, 007108095, 015156303
FSC: 5340 — Hardware, Commercial
CAGE: 62242 — UNIVERSAL MOTORS-OSHKOSH A DIV OF MEDALIST INDUSTRIES INC (USA)
SPECIFICATIONS
radius3.250 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
overall_width0.312 INCHES NOMINAL IN
overall_height0.312 INCHES NOMINAL IN
overall_length0.890 INCHES NOMINAL IN
mounting_methodTHREADED STUD(S)
outside_diameter2.125 INCHES NOMINAL IN
overall_diameter0.390 INCHES NOMINAL IN
special_featuresBLUE LED
style_designatorPLAIN
lens_transparencyTRANSPARENT
surface_treatmentCADMIUM OR ZINC
NSN5340-00-054-1415
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N132 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RADIUS: 3.250 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CONCAVE
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL THICKNESS: 0.083 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OR ZINC
•
MATERIAL: STEEL COMP 1010
TECHNICAL CHARACTERISTICS
RADIUS3.250 INCHES NOMINAL IN
OUTSIDE DIAMETER2.125 INCHES NOMINAL IN
STYLE DESIGNATORCONCAVE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL THICKNESS0.083 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC
MATERIALSTEEL COMP 1010
SUBSTITUTES & CROSS-REFERENCES 2
172593Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
114941Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N132?
N132 is a LIGHT EMITTING DIODE.
What parts can replace N132?
There are 2 known substitutes for N132: 172593, 114941. Substitute compatibility should be verified for your specific system.
What is the NSN for N132?
N132 is cataloged in the U.S. Government catalog under NSN 5340-00-054-1415. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N132