PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70424
70424 ✓ Verified by PartsTable
ICY BOX · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

<b>A new Hub</b><br>IB-AC6405-C is an independent USB 3.0 HUB with Type-C™ connector to host PC. The slim design and integrated USB 3.0 cable makes it perfect for Mac or PC-Notebooks on the go. You can expand four USB 3.0 Type-A interfaces to your PC or Notebook.

A 5 V DC interface is provided, so that you can connect an optional power supply (5 V/2 A, not included) for external USB-devices with high power consumption.<br><br><b>The new standard</b><br>USB 3.0 Type-C ports have two distinct advantages over the existing forms. They are smaller and therefore ideal for thin laptops and mobile devices and it is no longer necessary to insert the connector in a particular orientation. It always fits and thus saves the user a lot of small annoyances when connecting devices.<br><br><b>No more slots?</b><br>If you want to use your existing USB 3.0 devices on the latest mobile devices and laptops with a USB Type-C port this compact hub is a quick help.

It uses a single USB 3.0 Type-C port on its This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-7717, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
70424
NSN: 5330-00-118-7717
FSC: 5330
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length4.250 INCHES NOMINAL IN
flute_quantity2
overall_length6.750 INCHES NOMINAL IN
shank_diameter0.375 INCHES NOMINAL IN
special_featuresTAPER LG; FRACTIONAL SIZE 3/8
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter0.3750 INCHES IN
cutting_rotation_directionRIGHT-HAND
NSN5330-00-118-7717
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 70424 MFR: ICY BOX ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE LENGTH: 2.600 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: ASBESTOS OVERALL
•
APERTURE WIDTH: 0.600 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
APERTURE LENGTH2.600 INCHES NOMINAL IN
HOLE DIAMETER0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALASBESTOS OVERALL
OVERALL WIDTH1.120 INCHES NOMINAL IN
APERTURE WIDTH0.600 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURES2 APERATURES ALONG SAME CENTRAL LINE
OVERALL LENGTH7.120 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
49724Interchangeable
interchangeable cross-reference
interchangeable
R51Interchangeable
interchangeable cross-reference
interchangeable
15124Interchangeable
interchangeable cross-reference
interchangeable
80241Interchangeable
interchangeable cross-reference
interchangeable
70424Interchangeable
interchangeable cross-reference
interchangeable
2810H37-010Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70424?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70424?
70424 is a PARTS KIT,HYDRAULIC BRAKE WHEEL manufactured by ICY BOX.
What parts can replace 70424?
There are 7 known substitutes for 70424: 49724, R51, 15124 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70424?
70424 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-7717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70424

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026